Elation Design Spot 250 Pro, Руководство пользователя

Страница: 23 / 56

Design Spot 250 Pro™
©Elation Professional® 23 Design Spot 250 Pro™
8.1 Function Mode:
8.1.1 “Set DMX Address” - DMX address setting – This function is used to set or
adjust the fixture’s starting DMX address. Every device controlled by DMX has to have a
unique starting address. The addressing feature is what allows DMX to function
properly. The DMX address of a fixture is what allows it to communicate with a controller
properly. The DMX addressing also allows the fixture to ignore any DMX information
coming from the controller that is not meant specifically the fixture. Because each fixture
is connected in a daisy-chain fashion it is imperative to assign a proper and unique
starting DMX address to each and every fixture. The DMX address is non-destructive
and will remain in the fixture’s memory even when the power to the unit is switched off.
Memory is backed-up and retain by an internal power source that should last about five
years. For proper DMX addressing see Section 10/Page 33 of this user manual.
Manual Control
PAN
:
PAN =XXX
:
Fine adjustment of the lamp
Calibrate Values --Password--
Color wheel
:
Password=XXX
Color wheel=XXX
:
Calibrate and adjust the
effects to standard/right
position. Password “050”
User Mode XXXXXX (Band)
User Mode A
User Mode B
User Mode C User’s mode to change
channel numbers
U
se
rs
M
o
d
e
S
e
t
Edit User Mode A
Edit User Mode B
Edit User Mode C PAN
:
PAN = CH01
:
Preset User modes
Select Programs Auto Pro Part 1
Auto Pro Part 2
Auto Pro Part 3 Program 1 ~ 10 Program 1
Program 1 ~ 10 Program 2
Program 1 ~ 10 Program 3 Select programs to be run
Edit Program Program 1
:
Program 10
Program
Test
Step
01=SCxxx
Step
64=SCxxx (“STEP
XX”)
Testing program
Program in loop
Save and exit
Edit Scenes Edit Scene 001
~ Edit Scene
250 Pan, Tilt,…
--Scene
Time--
Input
By
Outside
Pan=xxx
TIME=xx.xs
Save and automatically
return
Manual scenes edit
E
d
it
P
ro
g
ra
m
Rec. Controller XX~XX Automatic scenes rec