manualshive.com logo in svg

Elation Design Par 575H, Руководство пользователя

Поделиться
Скачать
Elation Design Par 575H Скачать руководство пользователя страница 30

Design Par 575H™

©Elation Professional®                                                   30                                                                       Design Par 575H™

1.  Access the main menu.

2.  Tap the UP button until “RESE” is displayed, press ENTER.

3.  Tap the UP button until “SCAN” is displayed, then press ENTER to confirm.

4.  The display will show “ON/OFF”. Press the UP button to select “ON” to reset the

color motor. Press ENTER to confirm.

5.  Press MODE/ESC to return to the main menu.

6.  TIME MENU -

LIFE

 - Displays the fixtures total running time.

LAMP

 - Displays the lamp running time.

CLMP

 - Clears the lamp running time.

LIFE

 

- With this function you can display the total running time of the fixture.

1.  Access the main menu.

2.  Tap the UP button until ”TIME” is displayed, press ENTER.

3.  Tap the UP button until “LIFE” is displayed, press ENTER.

4.  Press MODE/ESC to return to the main menu.

LAMP

 - With this function you can display the running time of the lamp.

1.  Access the main menu.

2.  Tap the UP button until ”TIME” is displayed, press ENTER.

3.  Tap the UP button until “LAMP” is displayed, press ENTER.

4.  Press MODE/ESC to return to the main menu.

CLMP

 

- With this function you can clear the running time of the lamp. Note: 

Please

clear the lamp time every time you replace the lamp.

1.  Access the main menu.

Содержание Design Par 575H

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды