Elation Design LED 108IP Скачать руководство пользователя

Страница: 4 / 36

DESIGN LED 108IP™

©Elation Professional, Los Angeles Ca.

www.ElationLighting.com

1. GENERAL INFORMATION

INTRODUCTION

Congratulations, you have just purchased one of the most innovative and

reliable LED fixtures on the market today! The Design LED 108IP™ has been designed to

perform reliably for years when the guidelines in this booklet are followed. Please read and

understand the instructions in this manual carefully and thoroughly before attempting to

operate this unit. These instructions contain important information regarding safety during

use and maintenance.

UNPACKING:

Thank you for purchasing the Design LED 108IP™ by Elation Professional®.

Every Design LED 108IP™ has been thoroughly tested and has been shipped in perfect

operating condition. Carefully check the shipping carton for damage that may have occurred

during shipping. If the carton appears to be damaged, carefully inspect your fixture for

damage and be sure all accessories necessary to operate the fixture have arrived intact. In

the event damage has been found or parts are missing, please contact our customer support

team for further instructions. Inside the box you should find: the fixture, a DMX XLR cable, a

safety cable, and this manual. Please do not return this unit to your dealer without first

contacting customer support at the number listed below.

CUSTOMER SUPPORT:

Elation Professional

provides a customer support line, to provide

set up help and to answer any question should you encounter problems during your set up

or initial operation. You may also visit us on the web at www.elationlighting.com for any

comments or suggestions. For service related issue please contact Elation Professional

Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.

Voice:

(323) 582-3322

Fax:

(323) 832-9142

E-mail:

[email protected]

Forum:

www.ElationLighting.com/forum

Warning

To prevent the risk of fire and reduce the risk electrical shock do not attempt to

operate this fixture with the lens cover removed.

Caution!

There are no user serviceable parts inside this unit. Do not attempt any repairs

Содержание Design LED 108IP





































Результаты поиска

Содержание Design LED 108IP

Отзывы:

Похожие инструкции для Design LED 108IP

Бренды по названию

Популярные бренды

Elation Design LED 108IP, Инструкция пользователя

Результаты поиска

Содержание Design LED 108IP

Отзывы:

Похожие инструкции для Design LED 108IP

Бренды по названию

Популярные бренды