19
ELATION ARTISTE REMBRANDT™ S Y S T E M M E N U
Supports Software Versions:
≥
1.1.1
Features subject to change without notice.
*Rotation direction (Clockwise/Counterclockwise) and control of effects depends on head orientation and Pan/Tilt settings.
MAIN MENU
SUB MENU
OPTIONS / VALUES
(Default Settings in
BOLD
)
DESCRIPTION
FUNCTION
Set Dmx Address
A001~AXXX
DMX Address Setting
Dmx Value
ALL, *Function/Effect = XXX (Control, Pan, Pan Fine, …) DMX Value Display
Slave Mode
Slave1, Slave2, Slave3
Slave Setting
Auto Program
Master /
Alone
Auto Program
INFORMATION
Time Information
Current Time
XXXX (Hours)
Fixture Run Time From Power ON
Total Run Time
XXXX (Hours)
Fixture Total Run Time
Last Run Time
XXXX (Hours)
Fixture Last Run Time
LastRun Password
Password=
038
(PSWD Required)
Clear Last Run
ON /
OFF
Clear Fixture Last Run Time
Temperature Info
LED Temperature
XXX C° /
F °
Temperature of LED
Base Temperature
XXX C° /
F °
Temperature in Fixture Base
Head Temperature
XXX C° /
F °
Temperature in Fixture Head
Ethernet IP
000.000.000.000
000.000.000.000
Displays Fixture Ethernet Address
Fan Info
HeadFan: xxxx RPM
Displays Fan Info
Software Version
1U01: - 2U01:
≥
V1.1.1
Software Version
Error Info
Error Record 1 ~ Error Record 10
Fixture Last 10 Error Codes
PERSONALITY
Status Settings
Address via DMX
ON
/OFF
Address Via DMX
No DMX Status
Close /
Hold
/ Auto Fixture State When NO DMX Signal
Pan Reverse
ON/
OFF
Pan Reverse Movement
Tilt Reverse
ON/
OFF
Tilt Reverse Movement
Pan Degree
630/
540
Pan Degree Select
Feedback
ON
/OFF
Movement Feedback
Movement Speed
Normal
/ Slow
Movement Speed
P/T Brake Mode
Smooth
/Fast
Pan/Tilt Brake Mode
Lens Changing
Fresnel Lens
, PC
Lens
Select Lens
Hibernation
OFF, 01M~99M,
15M
Stand By Mode
Service Setting
Password
Password=
050
Service Password
RDM UID
XXXXXX
(XXXXXXXXXXXX)
Set RDM UID
(PSWD Required)
Clear Err. Info
ON/
OFF
Clear Error Info
(PSWD Required)
; Password
“=11”, enable FollowSpot function; use
password “=60” to open wireless related menu
USB Update
YES/
NO
Service Port - Software Updates
Fans Control
Auto
, High, Low, Studio, Mute
Select Fan Speeds
Display Setting
Shutoff Time
02~60m
05m
Display Shut Off Time
Display Reverse
ON/
OFF
Display Reverse 180º
Key Lock
ON/
OFF
Key Lock
Temperature C/F
Celsius/
Fahren
Temperature Switch Between C˚/ F˚
Initial Status
*Function/Effect = XXX… (Control, Pan, Pan Fine, …)
Initial Effect Position
Select Signal
DMX Only
DMX In/Out
Art-Net
Select Art-Net
sACN
Activate sACN
Ethernet IP
XXX.XXX.XXX.XXX
Ethernet IP (PSWD Required)
Ether Mask IP
XXX.XXX.XXX.XXX
Ethernet Mask IP (PSWD Required)
Set Universe
000
- 32767
Set ArtNet Universe
Dimmer Mode
Standard
, Stage, TV, Architectural, Theatre, Stage2,
Delay 0s, 0.1s, 0.2s… 10s
Set Dimmer Mode
Refresh
1200
, 900-1500, 2500, 4000, 5000, 6000, 10000,
15000, 20000, 25000 (Hz)
Set LED Refresh Rate
DimmerCurve
Linear
, Square, InverseSquare, S-Curve
Set Dimmer Curve Mode
Reset Default
ON/
OFF
Passcode=
011
Restore Factory Settings
(PSWD Required)
*Function/Effect: Control, Pan, Pan Fine, Tilt, Tilt Fine, Move Speed, Strobe, Dimmer, Dimmer Fine, Dimmer Mode, CMY Speed, CMY Macro, Cyan,
Cyan Fine, Magenta, Magenta Fine, Yellow, Yellow Fine, CTO, CTO Fine, Red, Red Fine, Green, Green Fine, Blue, Blue Fine, Color1 Wheel, Color1 Fine,
Focus, Focus Fine, Zoom, Zoom Fine, Iris, Iris Fine, Frost, Animation1, AnimationRot1, Animation2, AnimationRot2, Blade1A, Blade1A Fine, Blade1B,
Blade1B Fine, Blade2A, Blade2A Fine, Blade2B, Blade2B Fine, Blade3A, Blade3A Fine, Blade3B, Blade3B Fine, Blade4A, Blade4A Fine, Blade4b,
Blade4B Fine, Blade_Rot, Blade_Rot_F, BladeSpeed, BladeMacro
