Elatec GmbH
Page 8 of 12
Identification according to 47 CFR Part 2.1074
Devices subject only to Supplier's Declaration of Conformity shall be
uniquely identified by the party responsible for marketing or importing the
equipment within the United States. However, the identification shall not be
of a format which could be confused with the FCC Identifier required on
certified equipment. The responsible party shall maintain adequate
identification records to facilitate positive identification for each device.
Devices subject to authorization under Supplier's Declaration of Conformity
may be labeled with the following logo on a voluntary basis as a visual
indication that the product complies with the applicable FCC requirements.
The use of the logo on the device does not alleviate the requirement to
provide the compliance information required by §2.1077.
Compliance information according to 47 CFR Part 2.1077
(1) Identification of the product, e.g., name and model number
(2) A compliance statement as applicable, e.g., for devices subject to part
15 of this chapter as specified in §15.19(a)(3) of this chapter, that the
product complies with the rules; and
(3) The identification, by name, address and telephone number or Internet
contact information, of the responsible party, as defined in §2.909. The
responsible party for Supplier's Declaration of Conformity must be located
within the United States.
(b) If a product is assembled from modular components (e.g., enclosures,
power supplies and CPU boards) that, by themselves, are authorized under
a Supplier's Declaration of Conformity and/or a grant of certification, and
the assembled product is also subject to authorization under Supplier's
Declaration of Conformity but, in accordance with the applicable
regulations, does not require additional testing, the product shall be
supplied, at the time of marketing or importation, with a compliance
information statement containing the following information:
