19
Elastocon
Manual – Cell Ageing Oven EB 19, EB 20
Common specifications:
• The ovens perform well inside the apparatus
requirements in ISO 188, IEC 60811-1-2 and
other equivalent standards.
• The ovens are controlled from a PLC (with a
colour touch screen).
• Special design with controlled air exchange rate
and low air speed.
• The casing consists of steel, painted with powder
paint in bluegreen colour.
• The inner cells are made of aluminium.
• Temperature controller with 0,1 °C setpoint (PLC).
• Temperature indicator with sensor in each cell
(PLC).
• Fixed over temperature fuse.
• Flowmeters with needle valves, for setting the air
exchange rate.
• The air speed is low and is dependent on the
air exchange rate only, as specified in ISO 188
method A and IEC 60811-1-2.
• Alarm for low air pressure (PLC).
• Built in air pump.
• Cooling channels in the casing for low surface
temperature.
• Temperature controlled cooling fan for the
electronics cabinet.
• Indication of power failure (PLC).
• Run-time meter (PLC).
• Countdown timer (PLC).
• Microfilter for the air which removes 99,99 % of
all particles over 0,1 μm.
• Also available as high temperature versions, to
300 °C.
Optional accessories
EB-P
Ramp function for temperature setting
in the PLC.
EC 11
Monitoring software.
ED 04
Computer, PC.
Network cable.
