Industrial Edge Computing Gateway EG500
ELASTEL TECHNOLOGY CO., LTD.
WWW.ELASTEL.COM
4.1.3 Re-installation CM4
Now you have finished the expected OS installration on CM4.
1)
Re-install the CM4 module by linging up the white area sketch map, gently pop it down
into the sockets.
2)
Re-install the WiFi pigtail (if have) by pressing it into the connector.
3)
Ensure the thermal pads are still attached on CM4 CPU.
4)
Set the aluminum enclosure onto the bottom chassis, aligning the screw holes.
4.2 Operating Interfaces
Now the EG500 unit is ready to boot up. There are several operating interfaces to access the OS
and further configuration.
4.2.1 HDMI GUI
The Raspbian desktop version provide GUI desktop for operation. You will need a HDMI type
screen, USB keyboard and mouse. Connect your screen to EG500 HDMI port, USB keyboard
and mouse to EG500 USB ports. Now power on the EG500, you will be greeted with the
Raspbian welcome screen, configure each steps following the setup wizard, and the EG500 is
ready for use.
Содержание EG500
Страница 1: ...Edge Computing Gateway EG500 User Manual ...
