7
OPERATION
Caution
Always read the care label on your garment before setting the temperature.
The temperature indicator light lights up red. The red temperature indicator light flashs whilst the iron is
heating up. As soon as the iron reaches the set temperature, the temperature indicator light remains. The
temperature indicator light will go on during usage to indicate that the set temperature is being regulated.
As soon as the temperature indicator light remains, the steam iron is ready to use.
5. The ironing process can begin.
6. After ironing, let the appliance cool down in a location that is safely out of reach of children.
Filling of the water tank
1. Open the tank cover, tilt the iron backwards at an angle of 45 degree to the horizontal
（
see Fig.3
）
,
and fill proper water into the tank by a measuring cup. After filling, close the cover.
2. Close the cover of the water filling opening. Make sure that it clicks into place properly.
Note: If your tap water is very hard it is recommended that the tap water is mixed with distilled water on
50:50 ratio, or use distilled water only.
Steaming iron
1. Fill the water tank as described in the section “Filling the water tank”.
2. Insert the power plug into the wall socket.
3. Turn the temperature control button to your desired setting, which is depended on the fabric of the
garment. And the temperature indicator light illuminates. Then put the iron on its heel.
Caution
Always read the care label on your garment before setting the temperature.
The temperature indicator light (H) lights up red. The red temperature indicator light flashs on whilst the iron
is heating up. As soon as the iron reaches the set temperature, the temperature indicator light remains. The
temperature indicator light will go on during usage to indicate that the set temperature is being regulated.
4. As soon as the temperature indicator light remains, the steam iron is ready to use. Then set the steam
knob (D) to your desired steam output.
5. Hold the iron in horizontal position at the garments. Continue to move the iron when ironing.
Caution: Never direct the steam at people or pets.
6. Press the spray button (E) a couple of times to moisten the laundry if necessary. Before spraying, make
sure there is enough water in the tank.
7. Burst steam button (F) had better be used at maximum temperature, as it helps remove stubborn creases.
Wait a while before using the shot of steam button again to avoid splattering.
8. After ironing, disconnect the plug from the power, let the appliance cool down in a location that is safely
out of reach of children.
