7
It is only necessary to input the destination country for the item being posted outside Australia. However, not all of the
international services and supplementary apply to every country. There are different regulations regarding maximum weight
limits, postal services, etc. The PS3000N database has all regulations in memory and therefore eliminates guesswork and
trips/calls to the post office.
To make full use of the database functions, it is advisable to enter a country by its code or by typing the name of the country.
The entry of the domestic parcel zone is sufficient for prompts asking postcode.
For ease of use, each of the basic services is the subject of a separate chapter in this Manual and guides you through all
necessary steps including the supplementary services.
Note: The rates displayed in the following section may not be the latest rates of AusPost and are only used for
display and illustration purposes.
Domestic Post - STANDARD LETTERS AND POSTAGE METER RATES
The PS3000N "wakes up" in the Domestic Standard Letter mode when first switched on. If the scale has been used for other services press the
"AUSTRALIA” key.
PRESS
DISPLAY (Standard Rates)
DISPLAY (Postage Meter Rates)
The first line of display confirms the basic service selected and the second line displays the minimum rate of postage for that service.
Place the item to be posted on the weighing platform. The second line of the display will change to indicate its weight in grams and the equivalent
postage.
Note:
The maximum weight is 250 grams. If the weight exceeds limit, the display will automatically switch to Intrastate Large Letter.
When the scale is default to FM rates, the rates shown are for Postage Meters (PM will be displayed). Press Franked and Metered key to
switch between regular rates and Postage Meter rates.
Domestic Post - STANDARD LETTERS BARCODED AND METERED
Pressing “BARCODED AND METERED” when Small Letter service is selected will display Barcoded and Metered Small Letter service.
PRESS
DISPLAY
Domestic Post - LARGE LETTERS AND POSTAGE METER RATES
This is for sending Large Letters to an address in any state.
PRESS
DISPLAY (Standard Rates)
DISPLAY (Postage Meter Rates)
LARGE LETTER
125g $1.20
LARGE LETTER
125gPM $1.16
Note:
If the weight exceeds limit, the display will automatically switch to Parcel Post.
When the scale is default to FM rates, the rates shown are for Postage Meters (PM will be displayed). Press Franked and Metered key to
switch between regular rates and Postage Meter rates.
Domestic Post - LARGE LETTERS BARCODED AND METERED
Pressing “BARCODED AND METERED” when Large Letter service is selected will display Barcoded and Metered Large Letter service.
PRESS
DISPLAY
BAR & MTD LL
125g $1.16
Domestic Post
– CLEAN MAIL
Pressing “Clean Mail” when Small Letter service is selected will display the Clean Mail service. From Large Letter it goes to Clean Mail Plus.
PRESS
DISPLAY
BAR & MTD STD
125g $0.58
STANDARD
200gPM $0.58
STANDARD
200g $0.60
