5
SERIAL NUMBER DISPLAY
To display serial number press
(Person to Person key) while scale is going through Selftest.
The display will read:
Serial Number
XXXXXXXX (the 8-digit serial number of the scale)
FRANKED AND METERED RATES SETTING
Before using your new PS 3000N, you must set whether it will default to assessing Franked and Metered rates or not. To set
the default, please follow these steps:
1. Press
the „ENTER ZONE key.
The scale display will show
1: Lodgment SET:
2: FM/NoFM
2. Press the number 2 on the keypad. The scale will prompt
1: FM
2: NO FM
3. Press 1 if you want to use Frank and Metered rates or press 2 if you want to use the normal rates. A confirmation
message is displayed.
LODGMENT ZONE SETTING
IMPORTANT: you must set this function in your scale before assessing postage for domestic mail and parcels.
Before using your new PS 3000N, it is very important that it be told where it lives. This is necessary so that the internal
computer can assess postal charges from your location to any destination within Australia.
To set the Lodgment zone,
1.
Press the „ENTER ZONE‟ key.
The scale will prompt
1: Lodgment SET:
2: FM/ no FM
2. Press 1
on the keypad. The scale will display a “Lodgment Zone Entry” message for a short while and then it will
prompt
0
Enter Postcode
3. Type a Postcode
. Complete the entry by pressing “ENTER”
Refer to the Postcode table on the next page to identify the zone applicable to your own address.
