E L A N H O M E S Y S T E M S
VL10
© ELAN Home Systems 2011 • All rights reserved.
Page 11
Under
Cabinet
Installation
The VL10 is ideal for use installed underneath a kitchen or workshop
cabinet. This instruction assumes all pre-wiring has been previously
completed. To install VL10 under a cabinet:
1. Choose an appropriate mounting location underneath desired
cabinet or shelf.
2. Remove and remount the ELAN badge. Remove (2) screws from
rear panel location as shown in
Figure 4-1.
Remove the ELAN
badge, rotate it 180 degrees and replace. Tighten mounting
screws carefully.
DO NOT OVER TIGHTEN.
Figure 4-1 Badge Removal
3. Invert the image and touch screen input by placing the switch in
the rear most position, as shown in
Figure 4-2
.
