USER GUIDE REV A
E L A N H O M E S Y S T E M S
Page 3
© ELAN Home Systems 2005 • All rights reserved. 02/05
OVERLOADING
- Do not overload wall outlets, extension
cords or integral convenience receptacles as this can result in
a risk of fire or electric shock.
OBJECT AND LIQUID ENTRY
- Never push objects of any kind
into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
SERVICING
- Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
CAUTION: TO REDUCE THE RISK OF ELECTRONIC, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
DAMAGE REQUIRING SERVICE
- Refer all servicing to qualified
service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
REPLACEMENT PARTS
- When replacement parts are
required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
SAFETY CHECK
- Upon completion of any service or repairs to
this product, ask the service technician to perform safety checks
to determine that the product is in proper operating condition.
WALL OR CEILING MOUNTING
- The product should not be
mounted to a wall or ceiling.
HEAT
- Do not install near any heat source such as radiators,
heat registers, stores, or other apparatus (including amplifiers)
that produce heat.
NOTE
: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Subpart J, Part
15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
z
Reorient or relocate the receiving antenna.
z
Increase the separation between the equipment and receiver.
z
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
z
Consult the dealer or an experienced radio/TV technician
for help.
Changes or modifications may cause this unit to fail to comply
with Part 15 of the FCC Rules and may void the user’s
authority to operate the equipment.
CAUTION
z
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
INFORMATION TO USER
Alteration or modifications carried out without appropriate
authorization may invalidate the user’s right to operate the
equipment.
CANADIAN MODEL
NOTE:
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la Classe B est conforme à la
norme NMB-003 du Canada.
CAUTION
: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION
: POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPON-DANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.
EUROPEAN MODEL
NOTE:
This product has been designed and type-tested to
comply with the limits set out in EN55013, EN55020, EN60950,
EN55022: 1998 CLASS B4, EN55024: 1998, FCC RULES
PART 15 SUBPART B CLASS B. AS/NZS 3548:1995 CLASS B
IMPORTANT SAFETY NOTICES
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed
product registration form and keep it in a secure area. This is
for your security.
U.S. MODEL
CAUTION: This product satisfies FCC regulations when
shielded cables and connectors are used to connect the unit
to other equipment. To prevent electromagnetic interference
with electric appliances such as radios and televisions, use
shielded cables and connectors for connections.