Elan VIA! 4.0, Руководство по установке

Страница: 20 / 40

VIA!4.0
INSTALLATION MANUAL E L A N H O M E S Y S T E M S
Page 18 © ELAN Home Systems 2005 • All rights reserved.
Installation - Rough-In (cont’d)
New Construction
If installing the VIA!4.0 in a new-construction environment, it is advis-
able to use a VIABKT40 New Construction Bracket. Install these
brackets after the studs are in place and the electrical wiring is
installed, but before the dry wall is up. The VIABKT40 has provisions
for mounting to a stud on the left, right, or center of the stud bay.
Determine the mounting location and height, securely fasten the
rough-in bracket, and secure the Cat-5 and coaxial cables securely
to the bracket using tape or wire ties. Make sure to factor in the
thickness of the dry wall being used when determining the depth to
mount the rough-in bracket.
Stud
Right Side Mounting
Stud
Left Side Mounting
Center Mounting
Stud
Stud
Cross Beam