Elan PSD-63-IP, Руководство пользователя

Страница: 14 / 14

10. Trouble Shooting
PROBLEM REASON AND ACTION
The lighting can’t be started normally
Check the power connection is co-
rrect or not.
Please detect the voltage.
Power supply is damaged or incorrect
connected. Call a qualified personnel
to fix it.
Connection of control board is not
correct. Call a qualified personnel to
fix it.
Out of console’s control
Please check the DMX connector and
the power connection is connected
correctly or not. It means having sig-
nal if it shows twinkling of the decimal
point which in the lower right corner
of the screen when exiting the screen
saver.
Please check the DMX address set-
ting of lighting is correct or not.
Out of console’s control
Check CHMD setting is correct or not.
Please check whether the DMX line
is near to the high voltage wire or not.
In that case, it will damage or interfere
the DMX electric circuit.
The beam appears dim ,the brightness declines obviously
Check whether the CAL is started or
not and the set value is too small.
Check whether the POW is in over
temperature protection situation or
not, if yes, please take measures for
ventilation.
Note: only professionals should manipulate this equipment as above