Owner's Manual
7.1
7.2
• Ensure the engine cooling water has the correct proportion of anti-freeze
In addition to this you should, for example, consider the following:
• Remove, charge and store the batteries in a warm & dry ventilated place
• Grease the appropriate steering gear components
• Disconnect any gas bottles and place them in safe storage
Work on electrical wiring can create shock hazards or sparks.
• Drain toilet bowls
To prevent arcing or damage to the alternator, always disconnect battery
cables before doing any work on the engine's electrical system.
Maintaining the Electrical System
• Ensure deck drains are clear
Warning
Your boat and the systems and fittings on board can be damaged if they are not properly
prepared for the winter.
Winter Storage
Tighten all terminals securely and spray them with light marine
preservative oil.
Check all terminals for corrosion - corroded terminals and connectors
should be replaced or thoroughly cleaned.
• Take away any removable delicate on board electrics and electronics
Caution
Check all wiring insulation for signs of fraying or chafing.
Caution
Power feeds for accessory equipment must not be taken from the
voltmeter terminals.
You should refer to the advice given in the various handbooks supplied with this manual.
Check all wiring for proper support.
• Check the sacrificial anodes and replace as necessary
• Fill the diesel tanks to reduce the effects of condensation
• Check and protect all the systems on the boat
• Remove all water from the craft and protect it from rain
• Drain non-fuel tanks
Information
Always disconnect power sources and shut off battery switch, breakers
and/or pull fuses before checking electrical wiring or connectors.
Technical Software
© Licensed User: Elan d.o.o., 2019
42/44
