REFERENCE GUIDE
EL-NVR-8CH
10024106_REV-A_EL-NVR-8CH
29
www.elanhomesystems.com
CAMERA SETUP
Camera Setup > General
If you are installing an ELAN Cameras and/or ELAN NVR with an ELAN Controller, please refer to the “ELAN
Surveillance” Integration Note for setup and software confi guration. ELAN Integration Notes are served
through the ELAN tools and on elanhomesystems.com/dealer-resources.”
The software confi guration information in this document can be used to extend device control parameters
for use within an ELAN controller environment, or be used to operate this hardware independent of an ELAN
controller.
‘Click’ settings (
)to enter
NVR SETTINGS
, and ‘press’
CAMERA
(
) in the left pane to enter the
CAMERA SETUP
page. The setting options are described below.
The NVR supports three sets of virtual IP addresses. When
TCP/IP
is switched
On
, the NVR can access
the camera or another NVR using the specifi c IP.
Camera Name:
Enter the camera name to be displayed on the streaming screen.
Camera Source:
Allocate a NVR channel for the camera.
IP Address:
Enter the IP address of the camera you want to connect.
Dev. Info:
‘Press’ to check ONVIF capability.
HTTP Port:
Enter the port for HTTP connection.
RTSP Port:
Enter the port for RTSP connection.
