QUICK INSTALL GUIDE
EL-DB
2
3
SPECIFICATIONS
DIMENSIONS
Faceplate Size
3.5 x 5.67 x .375 (in) / 89 x 144 x 9.5 (mm)
Weight 0.55 lbs / .25 Kg
In-Wall Mounting Enclosure
2.87 x 4.7 x 1.97 (in) / 73 x 119.9 x 49.85 (mm)
Surface Mounting Enclosure
3.5 x 5.67 x 1.3 (in) / 89 x 144 x 33 (mm)
CONNECTIONS
Power: PoE - IEEE 803.2
48V / 13W (270mA) max.
Ethernet: 100 Mbps
Door Chime Relay: NO, rated 24VAC, 2A
Door Strike Relay: NO / NC dry contact,
rated 24VAC / 2A
Door Sensor: 5VDC–12VDC voltage
detection
Camera
Resolution: 720p
FPS: 30
Field of View: 140 degrees
Camera
(continued)
Exposure: Automatic
Monitoring: Integrates with ELAN
Surveillance (NVR)
Microphone / Speaker
Audio: Full-Duplex
Processing: Echo / Noise cancellation
Volume, Equalization, Sensitivity:
Adjustable in software
Proximity Sensor
Type: Passive Infra-Red (PIR)
Detection: IntelliVision
®
Analytics
reduces false positives
Range: Up to 5M, adjustable in software
Field of View: 120 degrees
General
Light Ring: Tunable color via software
Temperature Range:
-13F to 131F (-25C to 55C)
Humidity Tolerance: Up to 90%
Protection Rating: IP65
Thank you for including the ELAN Video Doorbell as part of the ELAN video
and interface solution for your customer. It has been designed to provide
years of trouble free operation when wired and installed properly.
Included in the box
•
1ea Video Doorbell
•
1ea Pigtail Cable Connector
•
1ea Rough-in Mounting Bracket
•
1ea Mounting Hardware and Gaskets
•
1ea Security Screw Driver
•
3ea Extra Security Screws
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7.
Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus (including amplifiers) that produce heat.
9. Only use attachments/accessories specified by the manufacturer.
10. Unplug this apparatus during lightning storms or when unused for long periods of time.
11. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
12. If a Class I PoE adapter or switch is used to provide power, be sure that the power
cord is firmly plugged into the socket and confirm the main earth connection.
CONSIGNES DE SÉCURITÉ IMPORTANTES
1. Lisez ces instructions.
2. Gardez ces instructions.
3. Respectez tous les avertissements.
4. Suivez toutes les instructions.
5. N’utilisez pas cet appareil près de l’eau.
6. Nettoyez uniquement avec un chiffon sec.
7.
Installez conformément aux instructions du fabricant.
8. Ne pas installer près de sources de chaleur telles que des radiateurs, bouches de chaleur,
cuisinières ou autres appareils (y compris les amplificateurs) produisant de la chaleur.
9. Utilisez uniquement les accessoires/pièces jointes spécifiés par le fabricant.
10. Débranchez cet appareil en cas d’orage ou lorsque vous ne l’utilisez pas pendant
longtemps.
11. Confiez toute réparation à un personnel qualifié. Une réparation est nécessaire si
l’appareil subit un dommage, par exemple si le cordon d’alimentation ou la fiche
est endommagé, si un liquide a été renversé ou si des objets sont tombés dans
l’appareil, si l’appareil a été exposé à la pluie ou à l’humidité, ne fonctionne pas
normalement, ou est tombé.
12. Si vous utilisez un adaptateur ou un commutateur PoE de classe I comme source
d’alimentation, assurez-vous que le cordon d’alimentation est branché fermement
dans la prise et assurez-vous qu’il s’agit d’une prise de terre.
