Elan C2 Communications Controller Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 73

Elan C2 Communications Controller Скачать руководство пользователя страница 67

E L A N H O M E S Y S T E M S

INSTALLATION MANUAL

© ELAN Home Systems 2009 • All rights reserved. Page 65

C2

1) Use 7/16 wrench to loosen the screw and rotate the camera.

2) Make sure the camera wire is located in the upper right corner of the camera module
when the DSC3 is viewed from the rear.

3) Adjust the viewing angle by carefully twisting the camera bracket.

4) Once the camera has been repositioned, tighten the bracket screw to secure the camera
at the desired position.

Cat-5 network cable must be used to connect ELAN Door Stations as shown in Figure 3-8 and
Figure 3-9. Connecting the DSC3 includes a video balun on the head end to provide power to
the camera module for cable lengths over 125 feet and up to 1000 feet. If Cat-5 network cable
is not applicable for your specific installation you can still wire your door stations. ELAN
suggests using RG59 for video and 18/2 for all other connects. In this case, the video balun
should not be used.

NOTE: ELAN recommends using the provided doorbell only. A non ELAN doorbell
has not been tested and is not covered under ELAN’s Door Station Warranty

DSC3 Doorbell Button Installation

The DSC3 Door Station is designed with a separate matching doorbell button from the door
station assembly. This enables the doorbell button to be installed in a conventional doorbell
location, and the door station mounted higher up for optimum camera viewing.

NOTE: ELAN recommends using the provided doorbell button only. A non ELAN
doorbell button has not been tested and is not covered under ELAN’s Door
Station Warranty.
NOTE: if the doorbell push button does not light after connecting the db+ and db- leads
from the Door Station, reverse the leads, polarity must be maintained
in order for the doorbell light to function properly.
NOTE: Be sure to pull the doorbell push button wires through the back of the
DBK1000 Door Station Rough-in Box.

«
...
65
66
67
68
69
...
»

Содержание C2 Communications Controller










































































Отзывы:

Нет отзывов