Elan C2 Communications Controller, Руководство по установке, Страница: 32 / 73

E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
Page 30 © ELAN Home Systems 2009 • All rights reserved.
C2
CAUTION: ALWAYS remove power to the C2 along with any other
electronics equipment prior to making any connections to or from the
C2. Set the Power Switch on the back of the C2 to the OFF
position prior to making connections.
Override
IR OUT
IR IN
N/C
N/C
+12V
GND
N/C
VSE2
RJ-45 to
Pigtail
2
Blue
White/Blue
Orange
White/Orange
Green
White/Green
Brown
White/Brown
VCO
+
-
+
-
+
-
+
-
To +12V
From IR Source
(IR Sensor,
Source Output, etc.)
To IR Device (IR Emitter,
Zone Input, etc.)
GND
BLUE
WHITE/BLUE
ORANGE
WHITE/ORANGE
GREEN
WHITE/GREEN
BROWN
WHITE/BROWN
1
2
3
4
5
6
7
8
PIN # COLOR CODE
FRONT
CABLE
Standard ELAN RJ-45 Pin-Out
TAB
Figure 3-2: C2 to VSE2 Wiring Pinout
C2 to PVSE Electronic Volume Control Precision Panel
When connecting the C2 to a PVSE Precision Panel, use an RJ-45 to pigtail connector.
Connect the Blue Override (pin 1) wire to “+” of the C2’s VCO connector.
Connect the White/Blue Ground wire (pin 2) to the “-” of the C2’s VCO connector. Plug the
RJ-45 into the OVERRIDE IN connector on the PVSE. See the PVSE Installation manual for
additional wiring for the PVSE and Electronic Volume Controls.
CAUTION: ALWAYS remove power to the C2 along with any other
electronics equipment prior to making any connections to or from the
C2. Set the Power Switch on the back of the C2 to the OFF
position prior to making connections.
Cat-5
Blue
Wh/Blue
Orange
Wh/Orange
Green
Wh/Green
Brown
Wh/Brown
Override
N/C
N/C
N/C
N/C
N/C
Ground
N/C
VCO
+
-
+
-
+
-
+
-
C2
PVSE
Override IN
OVERRIDE OVERRIDE
IN OUT
BLUE
WHITE/BLUE
ORANGE
WHITE/ORANGE
GREEN
WHITE/GREEN
BROWN
WHITE/BROWN 1
2
3
4
5
6
7
8
PIN # COLOR CODE
FRONT
CABLE
Standard ELAN RJ-45 Pin-Out
TAB
Figure 3-3: C2 to PVSE Electronic Volume Control Precision Panel Wiring Pinout