Elan Microelectronics EM60000 series Скачать руководство пользователя страница 9

Страница: 9 / 110

Chapter 1

Chapter 1

Introduction

1.1 General Description

EM60000 series is an 8-bit micro-controller based sound processor IC featuring

audio function that delivers multi-channel instrument playback. The

micro-controller consists of –

a powerful 8-bit RISC CPU that handles most of the speech/melody

functions

an 8K word program ROM

a voice ROM that extends up to one megabyte

The micro-controller provides 2 speech channels and 4 melody channels that

can be played back simultaneously. The speech synthesis is software

implemented and supports a wide range of sampling rates and diverse volume

levels.
The micro-controller also provides real instrument waveforms to obtain good

quality audio melody. The EM60000 offers one 8-bit input port and one 8-bit

I/O port with internal pull-low/wake-up functions for user’s applications. This

is in addition to the three general-purpose I/O ports that are provided. By

programming, applications such as section combination, trigger mode, output

control, keyboard matrix, and other logic functions can be easily implemented

with the micro-controller. Together, these powerful features motivate users in

achieving a wide range of innovative concepts.

1.2 Features

Operating voltage

2.4 ~ 5.5V

8-bit RISC CPU

Two general-purpose timers and two speech timers with interrupts

8K word program ROM access

Total of six channels - 2 speech and 4 melody channels (both channels can be

played simultaneously

Wide-range of speech sampling rates - 4KHz to 20KHz (program controlled)

Speech/voice algorithm is software (PCM, ASPCM, ADPCM) implemented

On chip Voice ROM that extends up to one megabyte

Uses real instrument waveforms for good quality audio melody

Built-in 8-bit by 8-bit hardware multiplier with 16-bit result

One 8-bit input port and one 8-bit I/O port with pull-low/wake-up functions

Provides additional general-purpose I/O ports (up to 3 ports)

EM60000 Series User’s Manual

Introduction

•

Содержание EM60000 series















































































































Результаты поиска

Содержание EM60000 series

Отзывы:

Elan Microelectronics EM60000 series, Руководство пользователя, Страница: 9 / 110

Результаты поиска

Содержание EM60000 series

Отзывы: