ELAD FDM-S2, Руководство пользователя

Страница: 28 / 32

ELAD FDM-S2 User Manual Rev 1.05 10/2014
© 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
28
Now driver update starts: at next dialog box select “Continue Anyway” and ignore the warning.
Let the hardware update automatically completes and, at the procedure ending, click on “Finish”; then
disconnect e connect FDM-S2 device on the same USB socket.
To verify that a correct update is done, enter “Device Manager” from Control Panel ; under “Universal
Serial Bus controllers” list, select ELAD FDM-S2 driver (see chapter “2.2.2.2 Driver installation verify”)
right click on it and choose “Properties”. Select “Driver” label to visualize the last driver version (an
example is depicted in figure below).