ELAD FDM-S2, Руководство пользователя

Страница: 23 / 32

ELAD FDM-S2 User Manual Rev 1.05 10/2014
© 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
23
Click on “Browse” and search for FDM-S2 driver update folder location; then open
winusb_fdmsampler.inf file. Click “OK” and then “Next”.
Let the hardware installation automatically completes and, at the procedure ending, click on “Close”;
then disconnect and connect FDM-S2 device on the same USB socket.
To verify that a correct update is done, enter “Device Manager” in Control Panel; under “ELAD samplers”
label select ELAD FDM-S2 driver (see sub-chapter “2.2.1.2 Driver installation verify”): right click on it and
choose “Properties”: select “Driver
” label to visualize the last driver version (an example is depicted in
figure below).