ELAD DUO-ART 60
User Manual - Rev. 1.3 - 04/2018
© 2018 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated
in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
6
2.2
Rear Panel Description
1 - Main power supply
Power switch, fuse holder and 100-240Vac power supply connector. Insert the power supply cable and
use the power switch to power up the amplifier.
2/3 - PTT in/out
3.5mm jack connectors.
PTT in
Input for transmit control, connect TIP to ground to put the amplifier in
transmit state.
PTT out
The TIP goes to ground while transmitting.
RING connection is not used.
4 - RTX connection
SO-239 connector. Transmit path with the FDMDUO interface. Reception and transmit paths with the
other interfaces (Generic and FT-817).
5 - RX connection
SO-239 connector. Reception path with the FDMDUO interface.
