EL-CELL ECC-Opto-10, Руководство пользователя, Страница: 17 / 21

Page 17 of 21
Release 1.21
User Manual ECC-Opto-10
6 Connecting the test cell
Connect your potentiostat to the 2 mm sockets of the cell. Note
that sockets 1 and 1S are short-circuited inside the cell housing,
as are sockets 2 and 2S.
7 Disassembly and Cleaning
Right after use, disassemble the cell in the reverse order of assembly. All chemicals used have
to be disposed of properly. All wetted parts are to be cleaned with water and/or other
appropriate solvents. All parts are to be dried immediately after cleaning at 80°C. All cell parts
made of PPS are to be dried immediately after cleaning overnight at 120°C.
NOTE : Leaving cell parts in contact with the ambient atmosphere while still being wetted with
electrolyte may result in severe corrosion.