- 5 -
PREPARING YOUR MOTHERBOARD
REMOVING FACTORY PROVIDED BACKPLATE
From the back side of the motherboard, remove five (5) screws using
Phillips head screwdriver.
After removing the mention screws also remove two (2) remaining
screws from the front side of the motherboard using Phillips head
screwdriver and take off the factory provided backplate.
REMOVING STOCK COOLER
Remove all encircled screws. There are four (4) MOSFET screws on
the back of the motherboard that needs to be removed. Additional
three (3) screws needs to be removed to remove the plastic I/O
cover. Store the screws for later use. You can attach the I/O cover
back, after you mount the Monoblock.
I/O COVER SCREWS
MOSFET SCREWS