- 5 -
STEP 3
PLACING THERMAL PADS
Once cut to size the thermal pads should be applied to the backplate as
illustrated below. EK made sure to provide customers with more than
adequate quantity of thermal pads to complete this step.
STEP 4
ATTACHING THE BACKPLATE
Place the backplate onto the PCB aligning all of the holes. Position an
M2.5x7 AX1 screw in each of the seven (7) mounting holes marked below
and then tighten them evenly using a Phillips head screwdriver. Do not use
excessive screwing force.
1
1
1+2
2
2
2
2
STEP 4
STEP 3
