- 7 -
When using optional Inlet and Outlet ports, it is mandatory
to use the enclosed EK-Extender G1/4 since these ports are
recessed into the plastic reservoir bottom.
Extender G1/4
CONNECTING THE D-RGB LED STRIP
Plug the 3-pin connector from the reservoir D-RGB LED light into the
D-RGB Header
on the motherboard. The LEDs will work if the pin
layout on the header is as follows:
+5V, Data, Empty, Ground
.
D-RGB Header
RGB Header
Содержание EK-RES X3 D-RGB
Страница 1: ...USER GUIDE RESERVOIR EK RES X3 D RGB...