- 46 -
CONNECTING THE FANS, PUMP AND
CPU D-RGB LIGHTS
STEP 1
Connect the 3-pin D-RGB LED connector from the pump-reservoir
unit, CPU water block and GPU water block, and fans to the D-RGB
header on the motherboard. The lights will work if the pin layout on
the header is as follows:
+5V, Data, Empty, Ground.
Please ensure that the arrow indicated on the connector is
plugged into the +5V line, as indicated on your motherboard. If
you connect LEDs to the 12V RGB header, it will damage them.
You may use the enclosed 6-way D-RGB splitter cable to connect all
the D-RGB cables into one header on your motherboard.
D-RGB Header
RGB Header
STEP 1
6-Way D-RGB Male
Splitter Headers
D-RGB
Connectors