- 8 -
STEP 2
For the EK- Quantum Momentum ROG Crosshair VIII Hero
Monoblock series water block to operate properly the G1/4 port
nearest to the right edge of the water block
MUST BE USED AS
THE INLET PORT
.
EK recommends the use of EK- Fittings. When using fittings other
than EK series please use hose clamps or appropriate substitute
to secure the tubing to the barb. The use of biocide containing and
corrosion inhibiting coolant is always recommended for any liquid
cooling system.
CONNECTING THE D-RGB LED STRIP
Plug the 3-pin connector from Monoblock D-RGB LED strip to the
motherboard.
Please ensure that the arrow indicated on the connector is
plugged into the +5V line as indicated on your motherboard.
Failure to do so will damage your motherboard or LED strip.
STEP 2
D-RGB Header
RGB Header
IMPORTANT:
Use this opening
as an Inlet Port!