ekwb EK-Quantum Convection M.2 NVMe, Руководство пользователя

Страница: 8 / 11

- 8 -
THERMAL PAD G
1.0 mm
THERMAL PAD G
1.0 mm
FIRST CONFIGURATION THERMAL PAD SELECTION AND PLACEMENT
STEP 1
The first hole alignment configuration is dedicated for M.2
drives with 500 GB storage and 1 TB storage. The picture below
represents the thermal pad selection approved by EK testing
on Firecuda 530 SSD drives. The use of thermal pad thickness
may variate for each M.2 SSD drive manufacturer as we cannot
guarantee the same height of chips on each. Check for proper
thermal pad contact once the heatsink is assembled. EK provided
you with two (2) thermal pads - 0.5 mm thickness and two (2)
thermal pads - 1 mm thickness so you can easily choose between
the most optimal thickness for your drive.
Picture for reference: Installing the Firecuda 530 SSD - 1 TB.
STEP 2
Once installed together, secure the backplate onto the front cover
with previously removed four (4) M2x4 screws. We recommend
tightening them in order as shown in the picture.
Please pay attention to hole alignment on both sides of the
heatsink!
STEP 1
STEP 2
For this step, you will need:
Phillips Head Screwdriver
1
2
3
4
Picture for reference:
Installing the Firecuda
530 SSD - 1 TB.