- 4 -
GENERAL INFORMATION
The EK-Loop Leak Tester Flex is a fast and safe way of testing for
possible leaks in your liquid cooling loop. One end is fitted with
a revolvable male G1/4” connection port so it can be directly
screwed into any standard port in your liquid cooling loop. The
other end is hooked up with a non-return valve which will make sure
that no air is escaping through the tester unit itself. A small
pump for pressurizing the loop is also included. Please keep
the pressure only in the pre-defined zone marked on the gauge to
prevent damage to your liquid cooling hardware OR see the table
below for use in specific cases.
The leak tester is designed to assure users that the newly made loop
is watertight and ready for filling and use. With the Leak Tester, it
is not necessary to complete a 24h test, which should otherwise
be performed. This tool also can ‘re-certify’ blocks that have been
opened for cleaning and reassembled.
PRESSURE GAUGE
MINI
PUMP
G1/4 TUBE
CONNECTOR
WITH THE
O-RING
FLEXIBLE TUBE
PUMP
CONNECTOR
WITH THE
O-RING
PLASTIC
CHECK VALVE
INSERTED INTO
THE PUMP
CONNECTOR
FILTER FOAM
PRESSURE GAUGE GASKET
MANIFOLD
