This product is intended for installation only by expert users.
Please consult with a qualified technician for installation. Improper
installation may result in damage to your equipment. EK Water
Blocks assumes no liability whatsoever, expressed or implied,
for the use of these products, nor their installation. The following
instructions are subject to change without notice. Please visit our
website at www.ekwb.com for updates.
Before you start using this product, please follow these basic guidelines:
The Leak Tester’s Tube Fitting requires only a small amount
of force to screw it firmly in the G1/4 threaded port of the
tested component, since the air seal is ensured by the rubber
O-ring gasket.
Use a Leak Tester only when all the components are tightly
sealed together and before filling the loop with the coolant.
