Revision 1.0. Released on 6
th
of May, 2014
STEP 5: CONNECTING YOUR RESERVOIR
It is mandatory to use the correct INLET and OUTLET port.
As
an inlet and outlet port you
need to
use exactly those ports that are
shown in the figure right. EK recommends using EK-CSQ compression
fittings for best water cooling experience.
STEP 6 (Option): MOUNTING RESERVOIR ON “EK-Dual DDC X-Top CSQ”
At first you need buy optional parts for
EK-Dual DDC X-
Top CSQ. Theas optional parts are sold separately in our
web shop. You need to purchase:
-
EK-PLUG G1/4
(only if you purchase EK-RES X3 TOP)
-
EK-RES X3 – TOP
or
EK-RES X3 - Multiport TOP
-
EK-RES X3 - TUBE 110
(different length available)
-
EK-Dual DDC X-Res Link CSQ - Add-On
It is mandatory to use the correct INLET and
OUTLET port.
As an inlet and outlet port you
need to
use exactly those ports that are shown in the figure right.
STEP 7: OTHER INSTRUCTIONS
VERY IMPORTANT NOTICE:
Once the installation is completed, it is a recommended practice to test the cooling circuit for leaks prior to powering up the computer. We recommend a 24 hour leak test prior to powering
up the computer. Do not test the water block using tap water pressure. This will rupture the top of the housing and render the block unusable (and will void your warranty).While all efforts have been made to provide the
most comprehensive tutorial possible, EK Water Blocks assumes no liability expressed or implied for any consequential damage(s) occurring to your equipment as a result of using EK Water Blocks cooling products, either
due to errors or omissions on our part in the above instructions, or due to failure or defect in the EK Water Blocks cooling products.
WARRANTY:
Our products are warranted against defects in materials or workmanship for a period of 24 months beginning from the date of delivery to the final user. During this period, products will be repaired or have
parts replaced at our discretion provided that: (I) the product is returned to the agent from whom it was purchased; (II) the product has been purchased by an end user and has not used for commercial purposes; (III)
the product has not been misused, handled carelessly, or used in a manner other than in accordance with the instructions provided describing its installation and proper use. This warranty does not confer rights other
than those expressly set out above and does not cover any claims for consequential loss or damage. This warranty is offered as an extra benefit and does not affect your statutory rights as a consumer. This warranty is
voided if the product comes in contact with aggressive UV additives or other improper liquids.
REQUIRED TOOLS:
Philips and Torx T20 head screwdriver 2,5mm allen key
EK-RES X3 – TO
or
EK-RES X3 - Multiport TOP
(sold separate)
EK-RES X3 - TUBE 110
(sold separate)
EK-PLUG G1/4 (sold separate)
EK-Dual DDC X-Res Link CSQ
- Add-On (sold separate)
4 x M4x25
Included In
“EK-Dual DDC X-Res Link CSQ - Add-On”
O-ring
Included In
“EK-Dual DDC X-Res Link CSQ - Add-On”
EK-CSQ compression fitting
OUTLET
G1/4
threaded port
INLET
G1/4
threaded port
TUBE
INLET
G1/4
threaded port
OUTLET
G1/4
threaded port
