This product is intended for installation by expert users only. Please
consult with a qualified technician since improper installation
may result in damage to the equipment. EK assumes no liability
whatsoever, expressed or implied, for the use of these products,
nor their installation. The following instructions are subject to
change without notice. Please visit our website at www.ekwb.com
for updates. Before the installation of this product, please read
important notice, disclosure, and warranty conditions printed on the
back of the box.
Before you start using this product, please follow these basic guidelines:
Carefully read the manual before beginning with the
installation process.
EK Fittings require only a small amount of force to screw them
firmly in place since the liquid seal is ensured with the rubber
O-ring gaskets.
The use of quality market-proven corrosion-inhibiting coolants
is always strongly advised for any liquid cooling system. For
best results, EK recommends the use of EK-CryoFuel Coolants.
