ekwb CPU Lignum, Руководство пользователя

Страница: 8 / 12

- 8 -
STEP 5
Tighten the fitting barbs in clockwise direction until the gasket underneath
is compressed.
The installation of the CPU water block is now complete.
Before proceeding with the installation It is mandatory
to remove the protective foil from the backside of the
water block.
With EK-Lignum series water blocks it is mandatory to use the port that
is nearest to the center of the water block as INLET port. Mixing the ports
may result in less than ideal thermal performance of the water block.
Fitting Ring
Fitting Barb
Inlet port
Outlet port
STEP 5
STEP 4
Placing Wood cover:
Before proceeding with the installation It is mandatory
to remove the protective foil from the backside of the
water block.
Place Wood cover over the water block. Then - using your fingers only,
press Wood cover on water block. Don’t exaggerate with the force applied.
Wood cover
Double sided
adhesive tape
STEP 4