- 6 -
STEP 2
Unscrew the four M4 screws in counter-clock-wise direction from the
bottom of the water block using enclosed 2,5mm Allen key to release the
assembly, consisting of water block top and jet plate. Upon replacing the
jet plate please reassemble the water block as shown on the in STEP 1 and
STEP 2 pictures. Pay special attention to the insert orientation relative to
the copper base and water block top!
Before reassembly of the water block it is crucial that the
preformed gasket (o-ring) is placed into the gap between
the mounting plate and the water block top.
Screw the four screws back in but don’t exaggerate with the force applied.
JET
Top
INSTALLING THE WATER BLOCK
LGA-2011 M4
Thumb Screw
LGA-2011 M4
Thumb Screw
LGA-2011(-3) / 2066 SOCKET MOTHERBOARDS
STEP 1
Prepare the foil bag with mounting mechanism, which is enclosed
with the CPU water block delivery.
Install four (4) specific LGA-2011 M4 thumb screws into four M4
threaded stubs on the LGA-2011 socket integrated latch mecha-
nism (ILM). The screws are to be installed using no tools (i.e. pliers).
It is recommended to remove the motherboard form the
PC chassis before proceeding with installation of the CPU
water block because of the space constraint limitations of
various computer cases.
STEP 1
STEP 2