/ 39 /
4. Cleaning POM (acetal) tops:
POM (polyoxymethylene) or
Acetal can withstand chemicals such as alcohol or acetone but EK
recommends to use these very sparingly as the drying chemicals will
surely leave some residue. Usually, the POM can be cleaned easily
just by the use of soft cloth and warm, soapy water - without the use
of any chemicals. Rinse with distilled water after cleaning.
PREVENTIVE STEPS
1. Using corrosion inhibiting coolant:
(such as EK-CryoFuel or
other market proven coolants) is highly recommended for any water
cooling loops. Since EK-CryoFuel is also a surfactant, it will prevent
algae growth and dirt deposition on all weted surface.
2. Refrain from using:
Copper Sulphate based additives in your loop
in order to prevent tarnishing on your water cooling gear internals!