- 11 -
PLACING THE BLOCK ON THE MOTHERBOARD
Carefully place your EK-Quantum Momentum Aorus Z490 Master
D-RGB water block on the motherboard or vice versa, as shown in
the picture. Make sure the mounting holes are aligned.
CAUTION: The protective sticker must be removed from the
coldplate.
ATTACHING THE BLOCK TO THE
MOTHERBOARD
STEP 1
Before you fasten the screws, make sure the mounting holes on the
motherboard’s circuit board are aligned with the water block. When
tightening the screws, do not use excessive force!
For the CPU:
Use four (4) M4 X 8 DIN7984 screws and M4 PVC washers. Tighten
the screws evenly using the enclosed 2.5mm Allen Key.
STEP 1
M4 x 8 DIN7984
PVC Washer
FOR CPU
