This product is intended for installation by expert users only. Please consult
with a qualified technician. Improper installation may result in damage to
your equipment. EK assumes no liability whatsoever, expressed or implied,
for the use of this product or its installation. The following instructions are
subject to change without notice. Please, read the manual carefully before
beginning with the installation process. For updates, you can visit our
official website www.ekwb.com.
Before you start using this product please follow these basic guidelines:
Carefully read the manual before beginning with the installation
process.
Remove your graphics card from the computer for the safest
mounting process to prevent any possible damage to your GPU or
its circuit board (PCB).
EK Fittings require only a small amount of force to screw them
firmly in place since the liquid seal is ensured with the rubber O-ring
gaskets.
The use of quality market-proven corrosion-inhibiting coolants is
always strongly recommended for any liquid cooling system.
Do not use pure distilled water as a cooling liquid! For best results,
EK recommends the use of EK-CryoFuel Coolants.
Make sure to bleed air out of your water block thoroughly in order to
reach optimal performance.
