- 16 -
STEP 6
Replace the Coldplate paying attention to the orientation, failure to
do so will prevent installation of the Screws. The curvature marking
should be on the same side as the curvature marking of the Frame.
Lastly screw in the four Screws, do not use excessive force!
STEP 6
INSTALLING THE WATER BLOCK - 115X AND AM4
STEP 1
Place the motherboard on an even surface and remove the Mounting
Mechanism from the plastic bags. Magnitude CPU Water Blocks
include only the parts required for the chosen socket.
STEP 2 (AM4 ONLY)
Using a Philips head screwdriver remove the four UNC #6-32 Screws
which secure the plastic hold-down clamps to the motherboard.
Remove the clamps as well as the original motherboard backplate
and store them away. See the illustration to identify these parts.
AMD® factory
Backplate
UNC 6-32
Screws
Hold-down
Clamps
STEP 2
Screw
Coldplate
