n
Install IDE 2.5” HDD
l
40-pin to 44-pin Converter
If you want to connect Easy IDE to a 2.5” slim hard drive, a 40-pin to 44-pin converter will be required.
This accessory is an optional item, it may not include for this package. But you can refer to following
photo and purchase this from your local dealer.
l
Connect a 2.5” HDD to Easy IDE
1) Connect 40-pin male header of converter to Easy IDE female connector.
2) Connect 44-pin female header into 2.5” hard drive disk’s dual row
header completely, and the mark
pin-1 should be matched with the 44-pin female flat cable red wire pin. Refer to the following
figure.
3) Connect both powered connectors together, and their red wire should be in the same side.
4) Connect Easy IDE USB cable to your PC system’s USB port.
5) Power ON the switch.
WARNING:
To avoid damage of hard drive, please handle with great care. Do not shake or drop the hard
drive, It may damage your storage hard drive.
