n
Install 3.5”, 5.25” HDD or CDROM/CDR/W/DVDROM drive
1.
Connects Easy IDE’s 40-Pin female connector to your drive’s 40-Pin male IDE connector, the
alignment should be precise and completely inserted in order.
2.
Insert the 4-P power connector to your drive’s DC input connector and the RED wire should be
approach to IDE connector side.
3.
Screw grounding wire to the side of metal case.
4.
Plug external power adapter to the Easy IDE’s DC jack.
5.
Connect Easy IDE USB cable to your PC host’s USB2.0 port.
6.
Press the side of
‘
•
’
mark on power switch to turn ON the Easy IDE.
7.
You can refer to following figures of drive installation.
WARNING:
To avoid damage of hard drive, please handle with great care. Do not shake or drop the hard drive,
It may damage your storage hard drive.