ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · [email protected] · www.ek.plus
4
CAM B3
USER MANUAL
Installation Guide.
Install the micro SD card into the camera
(Optional).
Remove the cover by removing the screws.
Insert the micro SD card that is to be installed,
which can be up to 128GB. Be careful to position
the front and back of the micro SD card before its
installation so that the camera can recognize the
card.
WARNING: IF INSTALLING AN SD CARD
ALWAYS DO SO WITH THE CAMERA SWITCHED
OFF AS IT IS LIKELY TO MALFUNCTION IF THE
CAMERA IS SWITCHED ON.
Replace the top cover.
Installing the camera on the wall.
Note: Prior to installation, ensure that the surface
where the camera is to be mounted can
withstand at least three times the weight of the
camera.
1) Drill holes where the camera is to be mounted
using a 3/16" drill bit.
2) Affix the included wall brackets to these holes.
3) Screw the base to the wall brackets with the
included screws. Once the base is mounted,
tighten the screws tightly.
•
Reset: Factory reset button.
•
LAN: Connect the LAN cable, only if
necessary. Do not connect the cable first
until it is configured via Wi-Fi.
•
Power: Connect to the power supply.