eks e-light-1000-4GM Скачать руководство пользователя страница 66

Страница: 66 / 77

Operating Manual

MAN_EL-1000-4GM

Version:

2.6.1

/ 01.02.2021

Authorized by:

T.W.

Page 66 of 77

5.11

Maintenance

The maintenance menu item is divided into the items backup, restore, firmware update, factory

settings, and restart, which are described in the following.

5.11.1

Backup

This menu item offers you the option to save the current configuration of the

EL-

1000

-4GM

as a file.

The backup can be stored via TFTP-server (Trivial File Transfer Protocol), as download or via usb-

device. In connection with restoring, the backup function enables you to save all settings and reload

them later to the device or use the current configuration in other devices.

The device creates a file with all settings. You have to store this file and can load it again to the device

with the restore function.

In order to save the configuration via TFTP, a TFTP server must be set up on a computer in the

network. Various TFTP server programs are available for download as freeware on the Internet.

Einstellungen TFTP

TFTP Server IP address: IP address of the TFTP server available in the network in decimal point

notation.

Settings TFTP, USB or HTTP

File name: File name of the switch configuration file to be saved.

If the parameters have been entered correctly, the backup can be executed by clicking on "Start

backup".

5.11.2

Restore

This menu item is used to import a configuration that was previously saved as a backup file. It can be

loaded vie tftp-server, as an upload or vie usb-device.

Содержание e-light-1000-4GM














































































Результаты поиска

Содержание e-light-1000-4GM

Отзывы:

eks e-light-1000-4GM, Руководство по эксплуатации, Страница: 66 / 77

Результаты поиска

Содержание e-light-1000-4GM

Отзывы: