eks e-light-1000-4GM Скачать руководство пользователя страница 3

Страница: 3 / 77

Operating Manual

MAN_EL-1000-4GM

Version:

2.6.1

/ 01.02.2021

Authorized by:

T.W.

Page 3 of 77

Laser equipment safety

The devices in the

EL-

1000

-4GM

product family include LED or LASER components as per

IEC 60825-1 (2014): class 1 laser/LED product.

Warning!

Do not use optical instruments (e.g. lenses, microscope) to look into the

beam of the optical transceivers! Ignoring this warning may result in eye damage.

CE conformity

The devices in the

EL-

1000

-4GM

product family match the regulations of the EU guideline

2014/30/EU

Directive of the Council… regarding electromagnetic compatibility

with the following standard and standardizing documents in the currently applicable version:

DIN EN61000-6-2

Electromagnetic compatibility (EMC) – part 6-2:

Generic standards – Immunity for industrial environments

DIN EN55032 cl. A:2016-2

Information technology equipment

Radio disturbance characteristics – Limits and methods of measurement

Warning!

This is a class A product. It may cause radio disturbances in living areas; in this case, the operator can be

required to take appropriate measures and to be responsible for these.

The installation instructions in this manual must be followed exactly so that the EMC threshold values

indicated are maintained.

Disposal notes

The devices must not be disposed with normal household waste but can

be returned to eks Engel FOS GmbH & Co. KG for disposal.

WEEE-identification: DE 900 53 255

Содержание e-light-1000-4GM














































































Результаты поиска

Содержание e-light-1000-4GM

Отзывы:

eks e-light-1000-4GM, Руководство по эксплуатации, Страница: 3 / 77

Результаты поиска

Содержание e-light-1000-4GM

Отзывы: