EkoTek Pager
Status and Warning Messages
When your EkoTek pager is switched on the standby screen is
displayed. This consists of the time and date, battery charge plus
additional status and warning messages. A typical screen is shown
below:
11:34AM 12.03.07 Day
Paul Smith
Silent
The first line is the clock displaying the current time and date, the
time may be in either a 12 or 24-hour format. The battery icon
shows the battery charge In the top right hand corner the pager will
display
Day
or
Night
this is used to indicate the shift mode.
The second line displays the
pager name
or
‘n’ unread message
,
showing how many messages have been received but not viewed.
The third line shows the status of the alert,
Silent
to warn that the
audible alert has been turned off, or
No Vibrate
to show that the
vibrate alert has been turned off. When both audible and vibrate
alerts are turned off,
Silent
is displayed. If nothing is displayed,
then both audible and vibrate alert are turned on.
The fourth line normally displays
Replace Battery
once the battery
reaches a state where it requires replacement, will be displayed.
The
battery icon will flash when the battery gets to the point where
the
‘Replace Battery’
message is displayed.
If the EkoTek pager is out of range from the wireless network the
Out of Range
message will also be displayed. In situations where
the ‘battery requires replacement’ and the pager is ‘out of range’
only the highest priority will be displayed.
Part No. 9261-8275 Issue 3.0
9