EkoTek Pager
Setting Auto Delete
The
Auto Delete
function allows you to set the maximum number of
stored messages, excluding those in the
Archive
memory. If the
number of messages in the memory exceeds the selected number,
then the oldest read message is deleted. Should there be no read
messages, then the oldest un-read message is deleted instead.
If the
Auto Delete
value is changed and the number of messages in
the memory exceeds the new setting, then one message will be
deleted per minute, until the memory equals the new setting. The
available options are 1 through to 6 messages. To access the
Auto
Delete
function, press
X
the button to display the options screen.
**> Options <**
Set 12 Hour Mode
Enable Powersave
Power Off
Press the
X
button to select
‘Options’
. Move the pointers to
Auto-
delete
by pressing the
T
button and select using the
X
button:
Display
**> Auto-delete <**
Alert
Set RX on Charge
The following screen will then be displayed:
Auto-delete
5
To set up
Auto-delete
, press the
S
or
T
button to change the
setting and then return to the standby screen by pressing and
holding the
X
button for one second.
Part No. 9261-8275 Issue 3.0
33
