Installation Manual | Fixed System
Assembly - Stinger Unit
EkoStinger|140 Despatch Dr, East Rochester, NY 14445|855.833.7940|[email protected]
pg.
10
Torque
23 ft-lb
Refer to
manufacturers
suggested
Torque values
on pg. 2.
Rear Brace Assembly
Attach the Left Brace (FxBr-L) by inserting 4x Outside Bolts (20091)
through 2x Faceplates (FxFp), Stinger Shell, and continuing through the
2x Spacers (FxSp), the Left Brace (FxBr-L), and fastening at the end with
4x Lock Nuts (20010). Make sure the Brace is facing inward just like in
the picture. Do the same for the right side.
3
Left Brace
FxBr-L
3/8 Lock Nut
20010
(4x)
Spacer
FxSp
(2x)
Faceplate
FxFp
(2x)
Outside Bolt
3/8-16 x 1.5 Hex Bolt
20091
(4x)
Fixed Faceplate Hardware Bag
Faceplates and Spacers w/ Bolts + Nuts
