EKOM DK50 4VR/50, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 27

DK50 4VR/50
04/2018 - 19 - NP-DK50 4VR50-11_04-2018
7
8
9
10
5
16
10
3
11
12
14
1
1
1
1
2
7
8
9
5
16
18 19
20
6
6
3
11
12
14
1
1
1
1
2
DK50 4VR/50/M
(NDM)
DK50 4VR/50/M
(MD)
12. FIRST OPERATION
Make sure that all stabilizers used during transport were removed.

Check that all pressurized air line connections are secure.

Connect to the mains.

Start compressor at pressure switch (2) by turning switch (3) to position “I.“(Fig.9)

For cabinet-mounted compressors, turn the switch (26) in Fig. 4 on the front side of the equipment cabinet
into the "I" position; a lighted switch indicates the equipment is in operation.

Compressor - At first operation the air tank is pressurized until it reaches a preset level when the
compressor automatically switches off. As the air is used, the compressor works in automatic mode,
switched on or off by the pressure switch.

Compressor with dryer – Compressor operation is the same and the moisture from the compressed air is
removed as it passes through the dryer.
For NDM - the condensate is also blown out of the drain on the dryer, which can be heard as a brief whoosh
sound when the compressor shuts down or when the drying chambers switch.
The compressor is not equipped with an emergency power supply.