5.0 SITE REQUIREMENTS
©
2016 Focal Point Fires plc.
3
3.0 ELECTRICAL INSTALLATION REQUIREMENTS
• Never immerse the product in water or any other liquids.
• DO NOT use the appliance outdoors.
• Before cleaning the appliance, ensure it is unplugged from the power and that it is com-
pletely cool.
• DO NOT clean the appliance with abrasive chemicals.
• Never use accessories that are not recommended or supplied by the manufacturer. It
could cause danger to the user or damage to the appliance.
• DO NOT insert or allow foreign objects to enter the inlet or outlet vents as this may
result in electric shock, fire or damage to the appliance.
• DO NOT install the fire using an extension cord.
• Unplug from the mains supply if the appliance is not to be used for long periods.
2.0 APPLIANCE DATA
Weight (kg):
17.0 kg
Supply Cord:
1.8 metres
Dimensions (mm):
H 965 x W 432 x D 152
Fuse:
13Amp
Supply Voltage and rating power: 220-240V a.c. 50Hz, 1800W
Location:
Indoor Use
Heating Elements:
2 x 900Watts (1.8kW)
Lighting:
LED
The appliance is supplied with a pre-wired three pin plug (13 Amp fuse rated), and 1.8 metre cable. A standard switched outlet/wall socket,
(including earth provision), must therefore be located within this distance, and be easily accessible in order to isolate the supply for maintenance
and cleaning. This socket must not be mounted behind or above the appliance.
IMPORTANT: THIS APPLIANCE MUST BE EARTHED.
1.0 PRELIMINARY NOTES - CONTINUED
GB IE
It should be noted that the appliance creates warm convected air currents. These currents move heat from the room
surroundings to, and up the wall surfaces adjacent to the heater.
Installing the heater next to these types of wall coverings or operating the heater where impurities in the air, (such as tobacco
smoke) exist, may slightly discolour wall finishing.
If the appliance is to be mounted on a dry lined or timber framed construction then the integrity and ability of the wall to
carry the weight of the appliance must be confirmed. It is important in these circumstances that any vapour barrier and/or
structural members of the house frame are not damaged.
If you are unsure of the ability of the wall to carry the weight and/or which type of wall fixing to use, you should take
professional advice and obtain the correct fixings. Alternatively, find a more suitable wall location.
DO NOT
• mount on a ceiling or floor
• recess any part of the appliance into the wall, or run the supply cable under carpets.
• site any electrical equipment e.g. plasma screen TV sets etc, on the wall below the appliance.
• site in a position where curtains or drapes could cover the appliance, or other soft materials could cover e.g. below a coat
rack
• site behind an opening door where mechanical impact/damage could occur
• site where the supply cable would become a trip hazard
• sit, stand or forcefully pull on the appliance
• obstruct, cover or force items into the openings
• use the heater to dry clothes
• site/use in an outdoor location(s)
It is important that the following clearances are maintained from the appliance to combustible materials. These clearances are
dependent on the mounting location as defined below:
4.0 COMPONENT CHECKLIST
QUANTITY
DESCRIPTION
1
Heater unit
1
Decorative glass facia
1
Remote control handset
1
Instruction Booklet
1
Bag of crystals
5
Fixing screws
5
Wall plugs
